Amie Brewer Valves May 03rd, 2019
The formula for the theoretical length of tubing, TL, needed to lower a set number of half steps, x, for an instrument of length, L,...
Claire Christian Valves April 11th, 2019
So valved instruments are set up so that each valve, individually is in tune. Problems occur when performers must use valve combinations to adjust the...
Carly Wood Valves April 11th, 2019
The second type is a product with override control to stop flow regardless of flow direction or pressure. It can not only close in response...
Bettie Boone Valves April 11th, 2019
Swagelok produces a variety of Check Valves to meet every need. All Check Valves are factory tested for crack and reseal performance with a liquid...
Amie Brewer Valves April 11th, 2019
Among all the above mentioned considerations, it is rather necessary to talk about the actuator and positioner design. These two must be considered together. The...
Amalia Hull Valves April 11th, 2019
Generally speaking, the valve for low-pressure and non-corrosive fluid is made of cast iron or cast copper. The high or middle-pressure is made of cast...
Alexandra Trevino Valves April 11th, 2019
With the increase of the steam flow rate and pressure, the plug valve can not satisfy the number of steam admission and exhaustion at all....
Alma Kelley Valves April 11th, 2019
Why do people use titanium valves anyway? It has been found that by lessening the valve weight of an engine, there is a big impact...