Carly Wood Valves April 14th, 2019 - 12:32:57
Needle Valves are used whenever control or metering of steam, air, gas, oil, water or other non-viscous liquids is required. This means they are used in almost every industry over a massive range of applications. Swagelok Valves are all factory tested with nitrogen at 1000 psig (69) bar to ensure that seats have a maximum allowable leak rate of 0.1 stdcm3/minute, and shell testing is performed to a requirement of no detectable leakage with a liquid leak detector.
A valve is a device which controls the flow rate, pressure or the direction. The controlled fluid can be the liquid, gas, the mixture of gas and liquid or the mixture of solid and liquid. The valve usually is composed of body, seat, bonnet, parts for opening or closing, actuating device, sealing element and so on. The controlling function of the valve depends on the actuating device or the movement of the fluid which drives the sliding, rotating or turning of the parts for opening or closing to change the area of the flow passage.
Titanium is used for lightweight valves because its density is low, making it attractive to designers of engines and valves. There are also instances where titanium is mixed with other metals to make alloys that will further make it able to withstand higher temperatures. Many high-speed cars make use of these valves, as they are able to run more reliably even at high speeds, which then induce higher temperatures in the car.
The general consumer is difficult to distinguish a fake ball valve from the original. Here are some simple tips to help in some cases this can be done. If you can not buy products directly from the distributor, you can contact him by phone and to clarify whether it is an official supplier of your seller. All known manufacturers of ball valves have their own web pages. Of these, you can learn about the mandatory labeling of attributes of products, design features, etc. Some manufacturers place the working drawings of its products. When you're all aware of the labeling, dimensions, weight and other attributes of your product, you will easily determine its authenticity. If such arrangements you have no time, you can use some practical advice:
Two thousands years ago, the Chinese people applied the bamboo trunk and wooden plug into water pipeline. Then later they applied the sluice into the irrigational canal, the plate check valve into bellows for smelting and so on. With the development of smelting process and hydraulic machinery, the plug valve made of brass and lead appeared in Europe. Besides, with the wide application of boiler, in 1681 the safe valve with lever and heavy bob came into the world. Before the invention of the Watt steam engine, the plug valve and check valve were the most important valves. The steam engine leaded the valve into a new field namely mechanical industry.
There are three kinds of this valve. There is a valve that is high in performance, which is reliable in functioning under higher pressure that can withstand as high as 725 PSI and temperature applications. Next is the resilient valve, it has an elastic rubber seat and could work up to the pressure of 232 PSI. Lastly, the tricentric valve that is commonly adorned with a seating made of metal and it can function up to the pressure of 1450 PSI.